Nursery Trays

• Economical tooling- Tooling can be created using soft materials. Wood and glass-filled epoxy are typical examples of low-cost materials that can be used for thermoforming applications. With higher production, water-cooled aluminum tools are preferred.

• Quick turn around- Parts can be produced from simple patterns. Patterns can be handcrafted or CNC machined Pattern tooling materials include high-density foam and hardwoods.

• Large part capability- produce a part up to 10 Ft x 14 Ft with a 36 in depth.

• Precise parts- With CNC trimming Parts can be held to a very close tolerance approaching that of injection molding.
• Material selection- Many materials lend themselves well to thermoforming including. ABS, HDPE, HIPS, PC, PVC, PP are just a few.
• Thick and thin wall sections- Thick Sheet Thermoforming technology can produce parts with a variety of wall thicknesses As thin as .030 inch Greater than .500 inch.

24 Cavity Pro Tray                                                RS 21/-

Overall Size 32 X 16 CM (3 TRAYS)

Top Size Cavity 6.5 X 6.5 CM

Bottom Size Cavity 5 X 5 CM

Centre hole of 12 CM, Depth 10 CM, Hills at bottom

Knotch at outer side of each cavity for stacking

Sheet thickness 1.2 mm

Weight 200 gm

24 Cavity Pro Tray                                                

Overall Size 32 X 16 CM (3 TRAYS)

Top Size Cavity 6.5 X 6.5 CM

Bottom Size Cavity 5 X 5 CM

Centre hole of 12 CM, Depth 10 CM, Hills at bottom

Knotch at outer side of each cavity for stacking

Sheet thickness 1.2 mm

Weight 200 gm

24 Cavity Pro Tray                                                

Overall Size 32 X 16 CM (3 TRAYS)

Top Size Cavity 6.5 X 6.5 CM

Bottom Size Cavity 5 X 5 CM

Centre hole of 12 CM, Depth 10 CM, Hills at bottom

Knotch at outer side of each cavity for stacking

Sheet thickness 1.2 mm

Weight 200 gm

24 Cavity Pro Tray                                               

Overall Size 32 X 16 CM (3 TRAYS)

Top Size Cavity 6.5 X 6.5 CM

Bottom Size Cavity 5 X 5 CM

Centre hole of 12 CM, Depth 10 CM, Hills at bottom

Knotch at outer side of each cavity for stacking

Sheet thickness 1.2 mm

Weight 200 gm

24 Cavity Pro Tray                                                RS 21/-

Overall Size 32 X 16 CM (3 TRAYS)

Top Size Cavity 6.5 X 6.5 CM

Bottom Size Cavity 5 X 5 CM

Centre hole of 12 CM, Depth 10 CM, Hills at bottom

Knotch at outer side of each cavity for stacking

Sheet thickness 1.2 mm

Weight 200 gm